How to process potato dregs into cattle and sheep feed? The potato dregs from the starch factory have been dehydrated, dried, mixed and mixed, and the production process of mixed feed is mature. The market supply of potato dregs processing feed equipment is sufficient and the price is not expensive. Zhengzhou Dingli customized the production of a complete set of potato dregs feed production equipment .
Potato dregs dryers are mainly drum dryers, and three-cylinder dryers are more common. The utilization rate of heat medium is high, and the residence time of materials in the drying area of the drum dryer is prolonged. The material is transported by the feeding device into the drying area of the dryer cylinder, and is continuously picked up and scattered under the copying plate of the inner layer to realize the downstream drying mode and heat exchange, and the material moves to the other end of the inner layer and returns to enter the drying. In the middle layer, countercurrent drying and re-heat exchange are realized in the way of two steps forward and one step backward. The material travels to the other end of the drying middle layer and falls into the outer layer, and the material travels in a rectangular multi-loop way in the outer drum, and the material that achieves the drying effect is Under the action of hot air, it travels quickly and discharges the drum. This drying mode not only fully absorbs the heat emitted by the inner drum, but also absorbs the heat of the middle drum to prolong the drying time and achieve ideal drying quality.