【Application】: Widely used for drying bean dregs, brewer grains, potato residue, sweet potato dregs, cassava pulp, tapioca slag, etc.
Bean dregs, the by-product during producing soy milk or tofu, is a kind of material with big water and oil combining performance. After being processed, it has the following advantages: fresh bean dregs’s water content is about 90%, its nutritional ingredient is higher than many inferior dregs; the crude protein content is high, especially in hot summer and high temperature, it is easily rotted and mildewed. Dry bean dregs’s crude protein content is three times higher than that of the unhulled rice. It is suitable for nutrition feed for pig, chicken and duck etc.
Bean dregs dryer is mainly consisted of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader and power distribution cabinet. After certain degree of dehydration and scattering, wet bean dregs enters into the drying roller through material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatters evenly and contacts with hot air sufficiently in drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by air-inducing device, which avoids material from being wet again. Bean dregs, the by-product during producing soy milk or tofu, is a kind of material with big water and oil combining performance. After being processed, it has the following advantages: fresh bean dregs’s water content is about 90%, its nutritional ingredient is higher than many inferior dregs; the crude protein content is high, especially in hot summer and high temperature, it is easily rotted and mildewed. Dry bean dregs’s crude protein content is three times higher than that of the unhulled rice. It is suitable for nutrition feed for pig, chicken, duck, etc. Bean dregs dryer is mainly consisted of the heat source(hot blast stove or gas producer furnace), material feeder(beater), rotary drying roller, discharger, induced draft fan, driving device, unloader and power distribution cabinet. After certain degree of dehydration and scattering, wet bean dregs enters into the drying roller through material feeder. Under the stirring of the lifting plates and shoveling plates that distribute evenly inside the roller, the bean dregs scatters evenly and contacts with hot air sufficiently in drying area. This speeds up the drying heat transfer and mass transfer. Wet air is pumped by air-inducing device, which avoids material from being wet again.
| Specification | Capacity（t/d） | Output（t/d） | Evaporation Capacity（t/h） | Moisture（%) | Dryer water(%) | Drying temperature（℃） | Total installed capacity（kw） | Weight（kg） | Area |
| DLJG1208 | 33.6 | 15.6 | 0.75 | 60±5% | 12-15% (adjustable) | 350-550℃ | 32 | 15000 | 5m*14m |
| DLJG1408 | 40.8 | 19.2 | 0.90 | 40 | 17000 | 5m*14m | |||
| DLJG1610 | 58.9 | 27.7 | 1.30 | 55 | 21500 | 6m*16m | |||
| DLJG2010/3 | 131.4 | 61.8 | 2.90 | 95 | 26500 | 8m*16m | |||
| DLJG2210/3 | 145.0 | 68.2 | 3.20 | 100 | 28500 | 8m*16m | |||
| DLJG2510/3 | 167.7 | 78.9 | 3.70 | 125 | 370000 | 10m*16m | |||
| DLJG2512/3 | 204.0 | 96.0 | 4.50 | 145 | 41000 | 10m*18m | |||
| DLJG2912/3 | 247.0 | 116.2 | 5.45 | 165 | 45500 | 10m*20m |
Bean Dregs Dehydration Drying Line has the characteristics of high temperature resistance and can dry raw material with high temperature hot air.
Bean Dregs Dehydration Drying Line has strong anti-overload capability, large processing capacity, low material consumption and low drying cost.
Adopts "centering roller device", which makes the roller and roller ring have linear contact, which greatly reduces wear and power loss.
There are two models of beer lees dehydrator, screw extruder and belt filter press. The dehydration effect of the two is the same. In comparison, the screw extruder dehydrates more beer slag.
Corn residues and other corn miscellaneous materials contain certain nutrients, which can be dried and processed by using dryer equipment. At present, many corn residue resource reuse projects will use corn residue dryer equipment.
Brewer's grain spent drying equipment is subdivided in the dryer structure and the drying process.
A lot of waste or leftovers can be processed by spraying to increase the protein content and then drying to make feed. At present, there are special feed spray drying equipment.
Tofu residue dryer as the name implies, is a device for removing water from high-moisture tofu residue.
The video of the sweet potato residue dehydrator was taken at the production site of the belt filter press.
The bagasse dryer is the main equipment for resource utilization of waste residue from sugarcane processing plants.
Corn stalk drying rotary dryer equipment also has a variety of models and drying processes, among which rotary dryers are one of them, and many users choose tumble dryers to dry corn stalks.
