Potato residue, also known as potato residue, is the residue of potato starch processing. With the development of potato residue utilization, the market demand for potato residue is increasing. How many dry materials can be dried by a few users who have just entered the line? As well as the cost of drying potato slag, this article will explain this issue for everyone.
How much drying raw material can be dried out by one ton of potato dregs?
It is understood that one ton of potato slag can dry 0.23 tons of dry material, specifically how much dry material can be baked by one ton of wet potato slag, which is related to the moisture of potato slag, the dewatering and drying equipment used.
To dry the potato dregs into feed, it takes several steps: dehydration-drying-packing, etc., the dehydrated potato slag is transported to the potato residue dryer through the conveyor, and the potato dregs are under the inner board. Constantly copying and scattering, spiraling to achieve heat exchange, the material moves to the other end of the inner layer and enters the middle layer for countercurrent drying. The material is continuously pushed forward in the middle layer, and the material is moved in two steps. In the middle layer, both the heat dissipated by the inner roller and the heat of the middle roller are absorbed, and the drying time is prolonged, and the material reaches the expected drying state. The material goes to the other end of the middle layer and falls into the outer layer. The material travels in a rectangular multi-loop manner in the outer drum. The material that achieves the drying effect quickly travels out of the drum under the action of hot air. The wet material that does not reach the drying effect cannot be fast due to its own weight. As the material travels, the material is sufficiently dried in the rectangular copy board, thereby completing the drying purpose.
How much does the potato residue cost?
The cost of drying potato slag mainly includes raw materials, sites, labor, equipment and heat sources. The cost of raw materials, sites, labor, heat sources, etc., needs to be determined according to local consumption levels, and the cost of equipment is also very large. The proportion, and how much it costs to buy potato dregs dryer equipment depends on the actual production needs, because different production conditions are different, including the type and model of the equipment. If you want to know the specific situation, you can consult Zhengzhou Dingli Factory for free. Here you have a professional technical manager to design the production plan and select and quote for you according to your requirements.
If you are interested in our equipment, or if we have anything to help you, you can always call our customer service number: +86 15670626070 You can also communicate with us online, and, you can also leave a message below. We will be happy to serve you!