Slime dryer manufacturers usually install and technically debug free of charge. Here are some key technologies that are ready to start production to improve the efficiency of slime drying and extend the service life of the dryer equipment.
The slime dryer equipment uses the principle of high-temperature evaporation to dehydrate slime, and uses drums to dry slime. First, after the dryer is installed in place, perform an empty test run for no less than 4 hours to verify the stability of the drum of the slime dryer and the cooperation status between all links. If abnormal conditions occur, they will be dealt with in time. ; After the test run is over, tighten all the link bolts again, check and replenish the lubricating oil, and start the test run of the wet slime dryer after the test machine is normal.
It is more important to note here that when the slime dryer equipment is in operation, it is necessary to ignite the hot blast stove to preheat the dryer and turn on the dryer at the same time. It is forbidden to keep the cylinder from heating to prevent the cylinder from bending.
Zhengzhou Dingli slime dryer manufacturer is responsible for equipment installation, technical commissioning and formal production, ensuring that all slime drying production lines are running normally and delivered to customers for production. If you are interested in Coal Slime Dryer, please feel free to contact us.
